6. PACKAGING
A-A-51176B
6.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the acquisition order (see 7.3(g)).
7. NOTES
7.1 Part or identification number (PIN). The following PIN procedure is for government purposes and does not constitute a requirement for the contractor.
AA51176 - X X X X Example of reference part number: AA51176 - 1A4B
Class: A - Coarse tooth spacing
B - Medium tooth spacing
C - Fine tooth spacing
D - Extra coarse tooth spacing
Size: (see tables I and II)
Style: A - Right-hand spiral fluting
B - Right-hand spiral fluting with chip breaker
C - Double cut fluting
D - Diamond cut fluting
Type: 1 - Type I (High speed steel)
2 - Type II (Tungsten carbide)
CID number
AA51176-1A4B identifies a high speed steel file with right hand spiral fluting, a shank diameter of
1/4-inch and a cutter head 3/4-inch long with a diameter of 1/4-inch, and medium tooth spacing.
7.2 Sources of documents.
7.2.1 FAR. The FAR may be obtained from the Superintendent of Documents, P.O. Box
371954, Pittsburgh, PA 15250-7954. Electronic copies of FAR documents may be obtained from https://www.arnet.gov/far/.
7.2.2 ASTM standards. Copies of ASTM standards may be obtained from ASTM International,
100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. Electronic copies of ASTM standards may be obtained from https://www.astm.org/.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business