A-A-51154B
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance.
5.2 Market acceptability. The product offered must have been previously sold either to the government or on the commercial market.
6. PACKAGING
6.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the acquisition order (see 7.3(h)).
7. NOTES
7.1 Part or identification number (PIN). The following PIN procedure is for government purposes and does not constitute a requirement for the contractor.
AA51154 - X X XX X
Example of reference part number: AA51154 - 2A10B
Class: A - Coarse tooth spacing
B - Medium tooth spacing
C - Fine tooth spacing
D - Extra coarse tooth spacing
Size: (see tables I and II)
Style: A - Right-hand spiral fluting
B - Right-hand spiral fluting with chip breaker
C - Double cut fluting
D - Diamond cut fluting
Type: 1 - Type I (High speed steel)
2 - Type II (Tungsten carbide) CID number
A-A-51154-2A10B identifies a tungsten carbide rotary file with right-hand spiral fluting, a shank diameter of 1/4 inch, a cutter head with a diameter of 7/16 inch, with 21 to 27 teeth per circumference.
7.2 Sources of documents.
7.2.1 ASTM standards. Copies of ASTM standards may be obtained from ASTM International,
100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. Electronic copies of ASTM standards may be obtained from https://www.astm.org/.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business