INCH-POUND
A-A-51154B
18 August 2005 SUPERSEDING A-A-51154A
5 September 1996
COMMERCIAL ITEM DESCRIPTION
FILES, ROTARY, BALL SHAPE,
HIGH SPEED STEEL OR TUNGSTEN CARBIDE
The General Services Administration has authorized the use of this commercial item description for all federal agencies.
1. SCOPE. This commercial item description (CID) covers the requirements for ball shaped, radius noise high speed steel or tungsten carbide type rotary files.
1.2 Intended use. The rotary files covered by this CID are intended for general purpose machining and deburring.
2. CLASSIFICATION. The rotary files shall be of the following types, styles, sizes, and classes.
2.1 Type. The type to be furnished shall be as specified (see 7.3(b)).
Type I - High speed steel
Type II - Tungsten carbide
2.2 Style. The style to be furnished shall be as specified (see 7.3(c)).
Style A - Right-hand spiral fluting
Style B - Right-hand spiral fluting with chip breaker
Style C - Double cut fluting
Style D - Diamond cut fluting
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGT@dla.mil or Defense Supply Center Richmond (DSCR), ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616.
AMSC N/A FSC 3455
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business